- Prewire Entire System, Then Install Your Signals
- Ease of Supervision Testing (Super Slide)
- Checkmate Feature: Instant Voltage Verification
- Lower Installation and Operating Costs
- Input Terminals 12 to 18 AWG
- Switch Selection for High or Low dBA
- Switch Selection for High or Low Frequency (1500-3000Hz)
- Tamperproof Re-entrant Grill
- Surface Mount with the GCSB (Gentex Surface Mount Box)
- Synchronize Strobe and/or Horn by Using Gentex Synchronization Module. AVSM
- Silence Horn While Strobes Remain Flashing
- Rugged Die Cast Metal Mounting Bracket
- True Evacuation Tone
- Wide Voltage Range 20-31 VDC or FWR
- Seperate Horn and Strobe Functions
- Widest Range of Candela Available
- Available in Red or Off-White
- UL/ULC Dual Listed 464, 1971
The GCS/GCC Series is a ceiling mount strobe or horn/strobe
combination that offers dependable audible and visual alarms and the lowest
current available.
The Commander4 offers tamperproof field selectable candela options
of 15, 30, 75, 95, 115 and 150 candela.
The GCC horn offers a continuous or synchable temporal three in
2400Hz or mechanical tone. These tones are easy for the professional to change
in the field by using switches. The models are shipped from the factory in the
temporal three alarm mode.
The GC Series has a minimal operating current and has a minimum
flash rate of 1Hz regardless of input voltage.
The Commander4 Series comes standard with the 4" mounting plate
which incorporates the popular Super-SlideTM feature that allows the installer
to easily test for supervision.
The Commander4 also features the CheckmateTM - Instant Voltage
Verification feature which allows the installer to check the voltage without
removing the signal.
The GC Series appliances are UL 464 and UL 1971 listed for use
with fire protective systems and are warranted for three years from the date of
purchase | 