 |
135-18
All New 100 Series 18.5" Deep Welded Cabinets (UL Listed)
35RU ![]() The economical Atlas Sound 135-18 cabinet is 22 5/16" wide, 18
1/2" deep, and contains 35RU vertical panel spaces. The 135-18 cabinet includes
one pair of 11 ga. CRS fixed mounting rails.
The serie is constructed of
16 ga. CRS and include base, top panel, side panels, mounting rails, a removable
rear door with cylinder lock and flush door pull handle.
Offers several
installer-friendly advantages, including an expanded 6RU opening in the cabinet
top and bottom which can be left open for wire access and/or ventilation, or
closed using a standard vent or solid panels. Rear doors (included with all
models) are hung with quick-release spring hinges which allow them to be rotated
180 ° for right or left-hand opening. If a front door is ordered, it will be
keyed differently than the rear door for security.
Rack rails are
precision tapped 10"“32 and recessed 11/16" (17.5mm). These plated rails include
convenient RU indicator hash marks to aid in equipment alignment. Rails are
standard E.I.A. 5/8"-5/8"-1/2" spacing.
Conduit arrays are located on the
top and bottom surface panels, as well as the top and bottom back flanges.
Flange arrays consist of five knockouts, three 1" (25mm) standard, and two 1/2"
(13mm) x 3/4" (19mm) concentric. Surface arrays are comprised of 4 knockouts,
two, 1" (25mm) standard knockouts and two 1/2" (13mm) x 3/4" (19mm)
concentric.
Stamped, perforated vents are located on all sides as well as
on the rear door to allow for maximum air convection. Cabinet surfaces are
phosphate pre-treated for proper paint adhesion of the textured black epoxy
finish.
|
|
