• UL Listed for Access Control
Systems (UL294),
CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File#
BP6714.
• 12VDC output.
• 10 amp
of continuous supply current.
• 115VAC 60Hz, 1.9 amp input.
• Filtered and
electronically regulated outputs.
• Short circuit and thermal overload
protection.
• Built-in charger for sealed lead acid or gel type battery
backup.
• Maximum charge current .7 amp.
• Zero voltage drop upon transfer
to battery backup.
• AC input and DC output LED indicators.
• AC fail
supervision (form "C" contact rated @ 1 amp 28VDC).
• Low battery and battery
presence supervision (form "C" contact
rated @ 1 amp 28VDC).
•
Lifetime
Warranty.
• Eight (8) Access Control System outputs.
- Eight (8) fuse
protected Fail-Safe and/or Fail-Secure 12VDC power outputs.
- Any power output may be
converted to dry form "C" relay output.
- Eight (8) fuse protected 12VDC
auxiliary power outputs (unswitched).
• Red LEDs indicate outputs are
triggered (relays energized).
• Eight (8) Access Control System trigger
inputs.
- Eight
(8) normally open (NO) inputs.
- Eight (8) open collector inputs.
- Any combination of the
above.
• Fire Alarm Disconnect:
- Fire Alarm Disconnect (latching
or non-latching) is individually selectable for any or all of the eight (8)
outputs.
-
Normally open (NO) or normally closed (NC) dry contact input.
- Polarity reversal input FACP
signaling circuit.
• Fire Alarm trigger LED indicates that the Fire Alarm
Disconnect has been activated.
• Fire Alarm output relay for triggering
auxiliary reporting devices (form "C" contact rated @ 1 amp 28VDC).
• Lifetime Warranty.
• Accommodates up to two (2)
12VDC/12AH batteries.
• Dimensions: 15.5"H x 12.23"W x 4.5"D.
• 1.125" and
1.375" combination knockouts.
|
