 |
|
AL1024ULXPD8CBR![]()
Model AL1024ULXPD8CBR power
supply/charger converts a 115VAC 60Hz input, to 24VDC @ 10 amp supply current
for Access Control application, 24VDC @ 8 amp supply current with 10 amp during
alarm for Fire Alarm applications distributed via eight (8) PTC protected Class
2 Rated outputs. Model AL1024ULXPD8R is a
fuse protected version of this unit. |
| |
• UL Listed for Access Control
Systems (UL294),
Power Supplies for Fire Protective Signaling Systems (UL1481),
CUL Listed - CSA
Standard C22.2 No.205-M1983, Signal Equipment.
File#
S4707.
• NFPA 72 Compliant.
• 24VDC output.
•
10 amp of continuous supply current for Access Control applications.
• 8 amp
of continuous supply current, 10 amp during alarm for
Fire Alarm applications.
•
Class 2 Rated power limited outputs.
• Eight (8) PTC protected outputs.
•
PTCs are rated @ 2.5 amp.
• 115VAC 60Hz, 4.4 amp input.
• Filtered and
electronically regulated outputs.
• Short circuit and thermal overload
protection.
• Built-in charger for sealed lead acid or gel type battery
backup.
• Maximum charge current .7 amp.
• Zero voltage drop upon transfer
to battery backup.
• AC input and DC output LED indicators.
• AC fail
supervision (form "C" contact rated @ 1 amp 28VDC).
• Low battery and battery
presence supervision (form "C" contact rated @ 1 amp 28VDC).
• Red
Enclosure.
• Lifetime
Warranty.
•
Accommodates up to two (2) 12VDC/12AH batteries.
• Dimensions: 15.5"H x
12.23"W x 4.5"D.
• 1.125" and 1.375" combination knockouts
|
|
