 |
|
AL400ULPD4CBR![]()
Model AL400ULPD4CBR power
supply/charger converts a 115VAC 60Hz input, to a 4 amp of continuous supply
current @ 12VDC or 3 amp of continuous supply current @ 24VDC distributed via
four (4) PTC protected Class 2 Rated power limited outputs. Model AL400ULPD4R is a fuse
protected version of this unit. |
| |
• UL Listed for Access Control
Systems (UL294),
Power Supplies for use with Burglar Alarm Systems (UL603),
Hospital Signaling and
Nurse Call Equipment (UL1069),
Power Supplies for Fire Protective Signaling Systems
(UL1481),
CUL
Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment.
File#
S4707.
• NFPA 72 Compliant.
• 12VDC or 24VDC
selectable output.
• 4 amp @ 12VDC or 3 amp @ 24VDC of continuous supply
current output.
• Class 2 Rated power limited outputs.
• Four (4) PTC
protected outputs.
• PTCs are rated @ 2.5 amp.
• 115VAC 60Hz, 1.45 amp
input.
• Filtered and electronically regulated outputs.
• Short circuit
and thermal overload protection.
• Built-in charger for sealed lead acid or
gel type battery backup.
• Maximum charge current .7 amp.
• Zero voltage
drop upon transfer to battery backup.
• AC input and DC output LED
indicators.
• AC fail supervision (form "C" contact rated @ 1 amp
28VDC).
• Low battery and battery presence supervision (form "C" contact
rated @ 1 amp 28VDC).
• Red Enclosure
• Lifetime Warranty.
• Accommodates up to two (2)
12VDC/7AH batteries.
• Dimensions: 13.5"H x 13"W x 3.25"D.
• 1/2" and 3/4"
combination knockouts.
|
|
