 |
| Voice
Siren Driver Module |
|
| ELK-110 |
The ELK-110 Voice "Talking" Driver
features high quality digitally pre-recorded voice messages and loud attention
getting siren sounds in an economical, low current draw, compact package. It
features two input channels, bilingual voices (English and Spanish), and many
unique options which allow it to be used with virtually any residential or
commercial alarm installation. The voice messages and the siren alternately
sound whenever one of the channels are activated. ![]()
The ELK-110 may be
customized by use of on-board jumpers. For example: our MilliMiserâ„¢ option allows the
already low current draw of the ELK-110 to be reduced even lower. This is ideal
for controls with limited alarm output power. The ComboTriggerâ„¢ option allows
controls which have a single alarm output and pulsing option to activate both
the burglar and fire alarm sounds. The VolumeStepâ„¢ option is best
described as the "peacekeeper", since it causes the siren sound to start at low
volume, gradually increasing over 90 seconds to maximum
volume. |
• Installer Friendly - Compact
& Easy to Mount
• Two Input Channels, Burglar & Fire
• Bilingual
Voice - English and or Spanish, Siren Only, Speech Only, or
Combined
• MilliMiserâ„¢ Lowers Current Draw
• ComboTriggerâ„¢ For Single
Outputs
• VolumeStepâ„¢ Slowly Increases Siren Volume
• Temporal Coded Fire
Signal
• Pre-Wired For Easy Installation
•
Lifetime Limited Warranty |
• Operating Voltage:
•
Current Draw:
• Sound Level:
• Max. Speaker Load:
• Size: |
10 to 14 Volts DC
1.25 Amps,
(800 mA on MilliMiserâ„¢ setting), with one 8 Ohm speaker
120 db @ 1
meter, 14 vdc, with one 8 Ohm speaker
4 Ohms
2.75" x 4.0" (70mm x
102mm |
|
